Lenzkes Clamping Tools

Click here to close this window!

Bolts - Standard
Products
Multi Quicks - Clamping Frames - Side Clamps NU & FL - Side Clamps SK & SKQ - Extension Blocks - Nuts & Washers - Bolts
Multi Quicks - Standard
	Clamping pressure to 80 kN. Step-less adjustment in both horizontal and vertical directions. Also used as an extension to the work table. Suitable for machines with tapped holes by simple removal of T-nut. Delivery available with any size T-nut. Material: Clamping shoe and clamping arm are quality steel CR 42 MO4 Delivery includes: Clamping shoe, arm and securing bolts, clamping surface finely milled. MQ60 Specification MQ60 spare parts

	Clamping Pressure to 50 kN. Vast Clamping range. Immense adjustability. Step-less clamping in both horizontal and vertical directions. Suitable for machines with tapped holes by simple removal of T-nut. Also used as an extension to the work table. Material: Clamping shoe and clamping arm are quality steel CR 42 MO Delivery includes: Clamping shoe, clamping arm, securing bolts and work piece protection plate MQ70 Specification MQ70 spare parts
	back to top
	Clamping pressure to 50 kN. Offers strong clamping pressure for small clamping torque. Highly adjustable through integrated sliding plate MQ100 Specification MQ100 spare parts

	Clamping pressure to 35 kN. Highly adjustable through stackable clamping shoe and clamping arm with integrated sliding plate. MQ110 Specification MQ110 spare parts

	Clamping pressure to 30 kN. High clamping pressure and adjustability through stackable triple clamping shoe and clamping arm with integrated sliding plate. MQ130 Specification MQ130 spare parts
	back to top
	Clamping pressure to 50 kN. High clamping pressure and adjustability through stackable double clamping shoe and clamping arm with integrated sliding plate. MQ200 Specification MQ200 Spare Parts
S Series Clamping Frames - Standard
	Clamping pressure to 90 kN. Vertical and step-less adjustment. To prevent damage to the machine table all clamping frames come complete with a pivoting pressure plate. Delivery available with any size T-nut. Delivery includes: Clamping frame, pressure plate and fixing bolts. Clamping surface finely milled. Material: Clamping frame constructed from quality steel. Series S20 is best suited to situations where protruding bolts are obstructive. S10 / S20 Specification S10 / S20 Spares
	back to top
	Clamping pressure to 70 kN. Vertical and horizontal adjustable at an angle to the slot of the machine table. To protect the machine table all clamping frames are fitted with a pivoting pressure plate. Delivery available with any t-nut size. Suitable for machines with tapped holes by simple removal of T-nut. Delivery includes: Clamping frame, pressure plate and fixing bolts. Clamping surface finely milled! Material: Clamping frame, constructed from quality steel. Series S40 is best suited 6to situations where protruding bolts are obstructive. S30 / S40 Specification S30 / S40 Spares
Side Clamps NU & FL - Standard
	Clamping Pressure to 16 kN. Sturdy and Reliable. Ideal for machining small components. Sits inside the machine table. Delivery includes: Clamping tool complete with clamping finger and body. Material: Clamping finger constructed from quality steel. View Specifications for the NU10
	back to top
	Clamping Pressure 40 kN. Ideal for clamping flat components. Delivery includes: Clamping body and fixing bolts. Material: Clamping body constructed from quality steel. View Specifications for the FL10
Side Clamps SK & SKQ - Standard
	Clamping Pressure 50 kN. Side clamping of work - piece to allow for free surface machining. Delivery available either with concave or plastic face. All components can be individually replaced. Central greasing nipple to reduce servicing time. View Specifications for the SK10

	Clamping Pressure 50 kN. Side clamping of work - piece to allow for free surface machining. Delivery available either with concave or plastic face. All components can be individually replaced. Central greasing nipple to reduce servicing time. View Specifications for the SKQ10
	back to top
	View SK /SKQ Spare Parts
Extension Blocks - Standard
	Clamping Pressure to 80 kN. Extension block series B50 / B50 K are compatible with all series. The Blocks are ideal: To clamp to any height both quickly and safely. To extend the machine - table for large work pieces. Suitable for machines with tapped holes by the simple removal of the T-nut. Delivery available with T-nut size. Other lengths and heights are available on request. Delivery includes: Extension block and fixing bolts. Material: Aluminium special alloy with 500 N/mm2 tensile strength. View Specifications for B50
	back to top
	Clamping Pressure to 200 kN. Extension block series B50 / B50 K are compatible with series MQ60 / MQ70 / MQ100 / MQ110 / MQ130 / MQ200 / MQ150 / MQ160 and S32. The Blocks are ideal: To clamp to any height both quickly and safely. To extend the machine - table for large work pieces. Suitable for machines with tapped holes by the simple removal of the T-nut. Delivery available with T-nut size. Other lengths and heights are available on request. Delivery includes: Extension block and fixing bolts. View Specifications for A55
Nuts & Washers - Standard
	T nuts DIN 508 Product class A according DIN ISO 4759 part 1 Hardness Class 10 Specifications and Sizes

	T nuts DIN 508 Product class A according DIN ISO 4759 part 1 Hardness Class 10 Specifications and Sizes

	T nuts DIN 503 L (long) Product class A according DIN ISO 4759 part 1 Hardness Class 10 Specifications and Sizes

	T nuts high form Product class A according DIN ISO 4759 part 1 Hardness Class 10 Specifications and Sizes
	back to top
	T nuts DIN 504 R (rhombus) Product class A according DIN ISO 4759 part 1 Hardness Class 10 Specifications and Sizes

	Double T nuts for stacking of clamping tools Product class A according DIN ISO 4759 part 1 Hardness Class 12 Specifications and Sizes

	Extension T nuts for stacking of clamping tools Product class A according DIN ISO 4759 part 1 Hardness Class 12 Specifications and Sizes

	Hexagonal fixture nuts DIN 6330 B 1.5d high Product class A according DIN ISO 4759 part 1 Hardness Class 10 Specifications and Sizes
	back to top
	Hexagonal collar nuts DIN 6331 Product class A according DIN ISO 4759 part 1 Hardness Class 10 Specifications and Sizes

	Extension nuts DIN 6334 B 3.0d high Product class A according DIN ISO 4759 part 1 Hardness Class 10 Specifications and Sizes

	Spherical seat washers form C DIN 6319 Insert hardened, hardness 550 + 100 HV10 Specifications and Sizes

	Dished washers form D DIN 6319 Insert hardened, hardness 550 + 100 HV10 Specifications and Sizes
	back to top
	Large dished washers form G DIN 6319 Tempered hardness, 350 + 80 HV30 Specifications and Sizes

	Washers DIN 6340 Product class A DIN 552, tempered Hardness 350 + 80 HV30 Specifications and Sizes
	T Slot Bolts DIN 787 Product Class A according DIN ISO 4759 part 1 Hardness class 10.9 Specifications and Sizes

	Hexagon high head screws Product Class A according DIN ISO 4759 part 1 Hardness class 12.9 Specifications and Sizes

	Stud bolts DIN 6379 Product Class A according DIN ISO 4759 part 1 Hardness class 8.8 Specifications and Sizes
	back to top
	Stud Bolts with hexagon insert Product Class A according DIN ISO 4759 part 1 Hardness class 10.9 Specifications and Sizes

	Countersunk screws with hexagonal inserts Product Class A according DIN ISO 4759 part 1 Hardness class 12.9 Specifications and Sizes

	Ball pressure screws with hexagonal inserts Product Class A according DIN ISO 4759 part 1 Hardness class 12.9 Specifications and Sizes
	back to top
	T-Bolt Set for T-Slots Complete with wooden box Specifications and Sizes